File record segment is unreadable что делать

What to Do When File Segment Becomes Unreadable?

Before we proceed to fix the File Record Segment is Unreadable issue, let’s understand File Record Segment quickly.

What is File Record Segment?

Every file system stores information about the files on a storage drive, which is called File Record Segment (FRS).

NTFS stores these records (usually 1KB size) in Master File Table (MFT) and FAT file systems (FAT16/32 & exFAT) store it in File Allocation Table (FAT).

When the OS needs to access a file, it first scans the file system table for the file record, reads the physical address of the file, and then reaches actual location on the drive to read the data.

Why Does ‘File Record Segment is Unreadable’ Error Appear?

Bad sectors cause ‘File Record Segments is Unreadable’ error which appears when CHKDSK scan is executed. Windows may also automatically execute CHKDSK scan during the system startup if it finds or detects any inconsistency or disk error.

A bad sector is a cluster of storage blocks on the drive that gets defected and do not respond to any read/write operation.

Therefore, when a sector or block where a file record is saved goes bad, the file record segment becomes unreadable.

This can happen with both internal and external hard drives including SSDs.

What happens when a File Record Segment becomes Unreadable?

The error is an indicator of a failing drive and poses a significant threat to the data stored on the drive. When Windows can’t find or read the file record in the file system table, you can’t access the data. Unfortunately, these bad sectors can’t be repaired.

Also, when several file record segments become unreadable due to bad sectors, a hard drive may get corrupt and turn RAW or unrecognized by Windows.

How to Fix File Record Segment is Unreadable?

There is no way to fix File Record Segment is Unreadable error, as bad sectors can’t be repaired. However, you may try CHKDSK scan and attempt to retrieve information from bad sectors. But this can have adverse effects with the potential of causing data corruption.

The only safe way to get back the inaccessible and lost data due to File Record Segment is Unreadable issue is by using a Windows data recovery software. Following are the steps to get back the data from a disk showing File Record is Unreadable message.

Recovering Data by using Data Recovery tool

[Caution]: It is strongly recommended to take backup of accessible data before proceeding with further steps.

• Download and Install the Stellar Data Recovery Standard software on a Windows PC.
• Connect the external hard drive to the PC via USB port. If you are prompted to the ‘Format hard Drive’ option box, click ‘No’. Skip this step if the drive is internal
• Launch the software

• Check the ‘All Data’ checkbox under ‘Everything’ and click the ‘Next’ button
• Then choose the affected internal/external storage drive, and turn on ‘Deep Scan’.
• After the scan, recoverable files and folders are listed in the left tree view pane. Click on the ‘File Type’ tab to quickly sort the data.

You can also click on a file to see its preview before saving.

• Select files to recover from the scan results. Use the search bar to locate desired files
• Click the ‘Recover’>‘Browse’ button to select the location where you want to save the recovered data.

• Finally, click the ‘Start Saving’ button. The selected recovered files and folders including those with File Record Segment is Unreadable error are saved at the desired location.

Connect to a Different PC or Use Linux LiveCD

Connect the drive to a different Windows system and access the data. Run CHKDSK scan to see if ‘File Record Segment is Unreadable’ error still exists.

However, if another PC isn’t available or the drive is internal, follow the steps below to create a Live LiveCD and check if your drive is recognizable and data is retrievable.

For this solution, a USB thumb drive of size 8GB or more is required. Once you have the thumb drive, follow the steps, and try recovering the files by using Ubuntu Live CD/USB:

1. Download Rufus app and Ubuntu OS ISO image.
2. Connect the 8GB USB thumb drive to PC
3. Run Rufus and then select the 8GB USB thumb drive from the drop down and leave everything default.
4. Next, from ‘Create a bootable disk using’ checkbox, select ISO Image. By default, it says Free DOS.
5. Click Start. When finished, shut down the PC.
6. Press power button to start PC/laptop and immediately start pressing F2 or F12 or DEL (please refer PC/Laptop user manual) to enter the boot options menu.
7. Select USB thumb drive as a bootable drive using arrow keys and hit Enter to boot Ubuntu.
8. Now select Ubuntu Live and hit Enter. Do not choose Install.
9. Next, connect the hard drive to the PC running Ubuntu Live CD/USB. Open FileExplorer and check if the files are accessible now

CHKDSK Scan (Optional)

In case hard drive is still not recognized, try running CHKDSK scan by following these steps:

1. Open elevated command prompt window
2. Type chkdsk /r X: where X is the drive letter showing File Record Segment is unreadable
3. Press ‘Enter’

If the same error appears again, use the recommended data recovery method to get back data without damaging it any further. Then format the drive and use a SMART disk analysis tool to check if the drive is failing or it is still usable.

Conclusion

Always keep a backup of the critical files and folders. You can use cloud storage or local external drive for the backup. It will help avoid unforeseen situations such as unreadable file segment record that cause data loss.

Also, defragment your internal and external hard drives once in a while. Alternatively, you may also run CHKDSK scan to keep the drive in good shape.

And if the file record segment is unreadable error message appears, use a data recovery software such as the Stellar Data Recovery- Standard to get back your critical data.

Источник: https://www.stellarinfo.com/blog/what-to-do-when-file-segment-becomes-unreadable/

File Record Segment Is Unreadable? Try These Ways Now!

To put it simply, each file on an NTFS volume is represented by a record in the Master File Table (MFT). The total number of file record segments (FRS) depends on the number of files saved on the NTFS partition, which in turn determines how many file record segments are in the MFT. 

CHKDSK Is Verifying Files File Record Segment Is Unreadable

Computer problems can happen occasionally, and some problems are just annoying but some are quite serious. Recently we have received many feedbacks from Windows users saying CHKDSK finds many unreadable segments on their hard drive.

Actually, this issue is very common and perhaps you are the one. And it can happen on your SSD, Western Digital disk, etc. If you search for some forums Reddit, and tomshardware, you can find many users discuss this topic.

See an actual case:

«So my laptop stopped working so I put the hard drive in my desktop and upon startup, it asked for me to scan the new drive, so I let it. Now, this scan has been going on for about 14 hours (there are a LOT of unreadable file record segments).»tomshardware

Some of you may think this issue is related to a virus problem. In fact, it is due to a disk problem. The disk check process will test the inside consistency of each file record segment. If the hard disk contains some bad areas, file record segment is unreadable error will occur.

What's more, this error message certainly indicates hard disk is failing. What if you are encountering file unreadable record segment? Here are a few things you should do right away.

File Record Segment Is Unreadable Fix

As a matter of fact, the file record segment unreadable error occurs because of the damaged disk.

As is well known, there’s no way to fix the physical damage on your hard drive, so you can only back up all important files and replace the problematic drive.

In a nutshell, we collect four possible ways for you. Please keep reading and try them your needs.

Way 1: Perform CHKDSK to Shield Bad Sectors

When the CHKDSK segment unreadable issue happens to your disk, you can take measure to shield those bad blocks to continue using this hard drive.

Check Drive in Windows

1. Go to Windows Explorer, right click on the drive with unreadable FRS error message, and choose Properties.

2. Navigate to Tools tab and click Check from Error checking section.

Use CHKDSK CMD in Safe Mode

Tip: In Windows, there is a special part called Safe Mode that can be simply perfect for troubleshooting. When encountering the disk segment unreadable issue, we recommend you to enter the Safe Mode and then perform CHKDSK scan.

As you know, the ways to enter the Safe Mode are different different operating systems.

In Windows 7:

1. Press F8 during startup to open the Advanced Boot Options menu.

2. Select Safe Mode with Command Prompt. Later, the Command Prompt window pops out.

In Windows 8/10:

2. Go to Choose an option> Troubleshoot> Advanced options > Startup Settings > Restart.

3. After your computer restarts, you will see a list of options. And you need to press the appropriate key to select any version of the Safe Mode.

4. Later right click on the Start button to choose Command Prompt (Admin).

After finishing the scan and repair, the bad sectors have been shielded. Then, you can try the next way.

Way 2: Clone Your Hard Drive to a New One

There can be nothing worse than a failing hard drive since you may meet the risk of losing all crucial files in one go. If the hard disk is corrupted to a certain extent and you have shielded the bad areas, now it is your time to back up all disk data. This is quite important.

Here, it is advised that you should clone the target hard drive for a backup when encountering file record segment is unreadable error. As for disk cloning, it means creating an exact same copy of the source disk. After a clone, the data can be directly viewed.

Usually, a piece of hard drive cloning software would be needed to do this. Here, we highly recommend using MiniTool ShadowMaker.

As professional, reliable and safe disk cloning software, it is specialized in cloning a system disk as well as a data disk to another hard drive. Besides, it also supports migrating Windows to SSD without reinstalling the operating system.

Right now, download MiniTool ShadowMaker Trial Edition on your computer to start the disk cloning to protect the data security or get its Pro Edition for the cloning.

Free Download

Tip: If your PC is unbootable, we suggest using the Bootable Edition of this software. Just create a bootable disc with Bootable Media to boot the PC and start a clone.

A step-by-step guide is here:

Step 1: Open MiniTool ShadowMaker in Windows 10/8/7 to enter the following interface where you can click the Connect button on the left side. Note that MiniTool ShadowMaker can only manage the computers on the same LAN via remote control.

Step 2: Under the Tools page, choose Clone Disk utility to continue.

Tip: • The target disk should have enough disk space to hold all disk data on the original disk. • You should make sure no important files are saved on the destination disk, or else, the cloning process will overwrite these files.

• A new disk is more suitable for storing the copy.

Step 4: Now, this hard drive cloning software is performing the cloning operation. Please wait patiently.

After cloning the problematic disk, you can shut down your computer and replace the original disk having unreadable file record segment error with the new target disk. Then, check if files are available.

Actually, many users have reported all files are available, so be sure to try this way. Now, free download MiniTool ShadowMaker to clone your hard drive to a new one.

Free Download

«I received the file record segment is unreadable error. To protect data security, I did CHKDSK CMD scan and used MiniTool ShadowMaker to effectively clone disk.»Click to tweet

Tip: In addition to MiniTool ShadowMaker, there is another disk cloning software called MiniTool Partition Wizard, enabling you to clone disk with simple clicks. This post How to Clone A Hard Drive to SSD in Windows 10/8/7 shows you much information.

Way 3: Try Data Recovery Software and Reformat Drive

When CHKDSK segment unreadable error message occurs, perhaps some files get lost. Then, you can choose to salvage your files by using a piece of data recovery software. Here, it is worth recommending using MiniTool Power Data Recovery.

And this software provides you with convenience in file recovery, enabling you to effectively retrieve lost files, pictures, videos, audios, documents and so on from a damaged drive, and no damage to the original data.

This software has Trial Edition that only allows you to scan and preview files but not recover data. And you can free download and install it in Windows 10/8/7 to check whether files can be scanned. If so, you can get a paid edition (Personal Deluxe) to recover them.

Tip: If your computer fails to boot, you can get the Bootable Edition in all paid editions to recover files when PC can't boot.

Step 1: Run MiniTool Power Data Recovery. To recover data from the drive with corrupt file record segment issue, This PC feature should be selected. Then, choose the target partition and click Scan to the next step.

Tip: The Settings option is helpful if you only want to scan certain file types as well as file systems.

Step 2: This software is scanning the selected partition. And you should wait until the process completes.

Step 3: Search for lost files in Path section or use Type, Find or Filter option to quickly find needed files. And then, check needed items and save them to a safe location.

Note: You had better store selected files to another hard drive (maybe the disk containing original data copy after a clone) instead of the original place.

Just go to Disk Management, right-click on the drive with the error file record segment is unreadable to choose Format, configure file system, volume label, and allocation unit size. If your PC fails to boot due to the disk segment unreadable issue, Format Partition feature of MiniTool Partition Wizard Bootable Edition can be helpful.

Way 4: Connect the Hard Drive to a Different PC

In addition to cloning a disk and performing data recovery, there is another way to salvage your files and that is to connect the drive to a different PC by connecting the drive internally or by using a hard drive enclosure. If you are able to access it, copy all your important files as many as possible.

Importance:

Hard drive failure can be devastating and unreadable sections of data will only get worse, hence, to recover as much data as you can will be the best way. And then, we strongly advise that you replace the damaged hard drive with a new one after a backup (especially disk cloning) or data recovery.

Conclusion

Do you use chkdsk /f command line to test your drive but receive «chkdsk is verifying files file record segment is unreadable» error message? Actually, it is due to bad sectors.

However, you cannot fix physically damaged disk but shield these bad blocks and then back up crucial data with three ways: clone a hard drive, recover data or connect the problematic disk to another PC to copy files. Please choose a suitable one the actual situations.

If you have some questions when using MiniTool software or any suggestions of this error, don't forget to tell us by leaving a comment below or sending an email to [email protected].

Источник: https://www.partitionwizard.com/clone-disk/file-record-segment-is-unreadable.html

“File record segment is unreadable” Windows 10 error [Fix]

Computer problems can appear once in awhile, and while some problems are just annoying, others are more serious.

Users reported File record segment is unreadable error on Windows 10.

This error usually appears if your hard drive is failing, but there are few solutions that you can try in order to save your files.

Solution 1 – Clone your hard drive to a new drive

If you’re getting File record segment is unreadable error, it means that your hard drive is failing. In order to salvage your files, it’s advised that you clone your current hard drive. To do that, you’ll need a new hard drive and hard drive cloning software.

Paragon Backup&Recovery Wizzard is one of the best options for this job, as it has more features, including cloning to a smaller-capacity disk by excluding files if there’s not enough space. Other good options you can try for free are EaseUS Todo Backup and Acronis Disk Director 12.

After cloning the problematic drive, use the new drive and check if your files are still available. Users reported that all their files and applications are available after cloning the drive, so be sure to try this solution.

We have to mention that some of your files might be permanently lost due to the damage on your hard drive. This isn’t a universal solution, but it should help you salvage your files from the problematic hard drive.

• READ ALSO: 5 best software tools to clone Windows 10

Solution 2 – Perform chkdsk scan from Safe Mode

Safe Mode is a special part of Windows that works only with default programs and drivers, therefore it’s perfect for troubleshooting.

According to some users, you can fix File record segment is unreadable error simply by entering Safe Mode and performing chkdsk scan.

To enter Safe Mode, you need to do the following:

1. Start Windows normally.
2. Once Windows starts, open the Start Menu.
3. Click the Power button. Hold the Shift key on your keyboard and choose Restart from the menu.
4. Your PC will now restart. Once the PC boots, choose Troubleshoot > Advanced options > Startup Settings. Click the Restart button.
5. After your PC restarts again, you’ll see a list of options. Select any version of Safe Mode by pressing the appropriate button.

If you can’t boot to Windows 10 at all, you can also enter Safe Mode by restarting your PC a few times during the boot process. After the Safe Mode starts, you need to start Command Prompt in order to run chkdsk. This is rather simple, and you can do it by following these steps:

1. Press Windows Key + X to open Win + X menu. Choose Command Prompt (Admin) from the menu.
2. When Command Prompt starts, enter chkdsk C: /R and press Enter to run it. Since you’re currently using your C drive, you’ll be asked if you want to restart your PC in order to perform the scan. Press Y and restart your PC. Wait for the chkdsk to finish and don’t interrupt it.

After chkdsk finishes the scan, you should be able to access Windows 10 and back up your files.

If the problem still persists, you can download GParted Live, create a bootable USB drive and boot your PC from it. Now you need to use the tool to create an image of your drive for backup.

After that, you can try fixing the drive by using Low Level Format tool such as Arconis True Image or HDD Low Level Format Tool.

• READ ALSO: How to move Windows 10 to an external hard drive

Solution 3 – Connect the hard drive to a different PC

File record segment is unreadable error usually appears if the surface of hard drive is scratched. Unfortunately, there’s no way to fix physical damage on your hard drive.

However, this doesn’t mean that your files are lost. You can still salvage some of your files by connecting your hard drive to a working PC.

You can do that by connecting the hard drive internally or by using a hard drive enclosure.

Some users are also suggesting to purchase a new hard drive and add it to your PC. Now you need to install Windows 10 on a new hard drive. After doing that, simply copy all important files from the failing drive to the new drive.

• READ ALSO: 14 best HDD health check software for PC users

Solution 4 – Use a Data Recovery tool

If you have problems with File record segment is unreadable error, you might be able to salvage your files by using Data Recovery software.

EaseUS Data Recovery Wizzard (free download) is one of the best options to recover lost data due to damaged hard drive, software crash, formatted or virus infection and other unknown reasons.

After recovering the files using these tools, simply reformat your drive and you should be able to use it again. We have to mention that this is just a temporary solution.

If the error is caused by physical damage on your hard drive, you’ll encounter this error again or your hard drive will fail completely.

If you’re still having issues with your hardware, we recommend you to download this tool (100% safe and tested by us). This application can fix wide range of issues, including hardware failure, and it might even fix File record segment is unreadable error.

File record segment is unreadable error usually occurs if your hard drive is damaged or failing. Since there’s no way to fix the physical damage on your hard drive, we strongly advise you to back up all important files and to replace the problematic drive.

READ ALSO:

Источник: https://windowsreport.com/file-record-segment-is-unreadable/

4 Solutions to Eliminate File Record Segment is Unreadable Error

The PC problems can look occasionally, even though some problems are just infuriating. As the others are much more serious.

Users reported File record segment is unreadable problem on Windows 10.

This problem usually looks if your hard drive is declining, but there are few alternatives that you can test to conserve your files.

Original symptoms of drive problem was a milling noise, then blue Screen (don’t keep in mind the Stop code), then wouldn’t boot.  Pulled drive, linked right to another Computer with USB machine, ran chkdsk /f.

  When it first began, chkdsk skipped a few, seemingly readable, industries, but it’s been running almost a day now and is also confirming every sector as unreadable.  It spends about 20 a few moments attempting and then continues on to another sector.

  I’ve read a couple of things that came through to a google search. However, the problems mentioned there appeared to be limited by a few industries.

The best plan of action to rescue the info from the hard drive before it fails is to change it off immediately. Also, you will need to obtain it from a data restoration company.

Persevering with wanting to retrieve the info will be fruitless and can quickly eliminate the drive. In addition, it damages any chance there is certainly of getting the info back.

How exactly to fix “File record segment is unreadable” problem on Windows 10?

When CHKDSK is run either by command line quick or at startup, you might see a set of messages that signifies file record segment is unreadable. This article will bring your focus on the reason why & solutions because of this Check Disk problem in Windows OS.

What Are File Record Segments?

In NTFS, every single file & website directory by using an NTFS partition is exclusively recognized by a definite File record segment (FRS) in the Master File Desk (MFT). Besides, to keep a record of what FRSs are used, NTFS maintain bitmap on the drive.

Why CHKDSK information file record segment is unreadable

When Check Disk is run, it reviews each File record segment that resides in volume’s master file table (MFT) for inside consistency.

CHKDSK information file record segment is unreadable if the hard disk drive contains bad areas.

Furthermore, the problem certainly indicates hard disk drive is failing scheduled to the problem in the drive either literally or logically. You may even face repair MFT on exterior hard drive problem.

If the drive is extremely ruined which it cannot enable you to store the backup then prepare yourself because all the info is ly to be lost. Nevertheless, let’s face this problem head-on and make an effort to solve it.

Solution 1 – Clone your hard drive to a fresh drive

If you are getting File record segment is unreadable problem, this means that your hard drive is faltering. To be able to salvage your files, it’s recommended that you clone your present hard drive. To achieve that, you’ll desire a new hard drive and hard drive cloning software.

Also See, 14 Useful Techniques to Know How to Free Up Disk Space

After cloning the difficult drive, use the new drive and check if your files remain available. Users reported that their files and applications can be found after cloning the drive.

This is not a common solution, but it will help you salvage your files from the difficult hard drive.

Solution 2 – Perform chkdsk check in Safe Mode

Safe Mode is a particular part of Windows that works only with default programs and motorists. Therefore it’s simply perfect for troubleshooting.

According to some users, you can fix File record segment is unreadable problem simply by stepping into Safe Mode and doing chkdsk check out.

To enter in Safe Mode, you must do the next:

Steps to Eliminate File record segment is unreadable Issue

1 – Just start your Windows normally.

2 – Once Windows starts off, start the Start Menu.

3 – Click on the Power button. Contain the Shift key on your keypad and choose Restart from the menu.

4 – YOUR PERSONAL COMPUTER will now restart. After the Personal computer boots, choose to Troubleshoot> Advanced options > Startup Settings. Click the Restart button.

5 – After your personal computer restarts again, you will see a set of options. Choose any version of Safe Mode by pressing the correct button.

Following the Safe Mode starts, you will need to get started on Command Prompt to be able to perform chkdsk.

That is rather simple, and you will take action by pursuing these steps:

Press WindowsKey + X to open up Be Win + X menu. Choose Command Prompt (Admin) from the menu.

Note:

When Command Prompt starts off, enter chkdsk C: /R and press Enter to run it.

Since you’re presently making use of your C drive, you will be asked if you need to restart your personal computer in order to execute the check.

Press Y and restart your personal computer. Await the chkdsk to complete and do not interrupt it.

After chkdsk surface finishes the scan, you ought to be able to gain access to Windows 10 and support your files.

After that, you can test mending the drive by using Low Level Format tool such as Arcon is TrueImage or HDD Low Level Format Tool.

Solution 3 – Hook up the hard drive to a new PC

The “File record segment is unreadable” problem usually looks if the top of the hard drive is scratched. However, there is no way to repair physical harm on your hard drive.

However, this won’t imply that your files are lost. You are able to still salvage a few of your files by attaching your hard drive to an operating PC.

You can certainly do that by linking the hard drive internally or by using a hard drive enclosure.

After linking the drive, you ought to be able to get access to it and copy your important files. After making a back-up, you will have to get a fresh hard drive and set up Windows 10 onto it. You will move your files to a fresh hard drive and continue where you remaining off.

Some users are also recommending to buy a fresh hard drive and add it to your personal computer. Now you will need to set up Windows 10 on a fresh hard drive. After doing that, simply duplicate all important files from the declining drive to the new drive.

Solution 4 – Use Test Disk or R-studio Data Recovery

When you have issues with File record segment is unreadable problem, you may be in a position to salvage your files by using Test Disk or R-studio Data Recovery software.

After recovering the files using these tools, simply reformat your drive and you ought to have the ability to make use of it again. We must mention that is merely a momentary solution.

When the error is triggered by physical harm on your hard drive, you’ll face this problem again or your hard drive will are unsuccessful completely.

If you are still having problems with your hardware, we recommend that you download the Reimage Plus. It really is 100% safe and examined by us. This program can fix the huge selection of issues, including hardware inability, and it could even fix File record segment is unreadable problem.

File record segment is unreadable problem usually occurs if your hard drive is ruined or failing. It really is true that there surely is no way to repair the physical destruction on your hard drive. So, we highly help you to back again up all important files and replace the difficult drive.

Источник: http://www.dprotricks.com/solutions-file-record-segment-is-unreadable-error/

File record segment is unreadable

If you have encountered the «File record segment is unreadable» error, do not ignore it. Take action as soon as possible, since the error can lead to more serious problems such as data loss. This message usually appears when searching for disk errors or simply trying to start a Windows computer.

File record segment is unreadable» indicates that there is a problem with the hard drive.

This could mean that the hard drive was corrupted physically or logically, is failing, and you are at risk of losing your data. It is possible that multiple bad sectors on the hard disk are resulting in this error.

You are strongly advised to generate backups before you lose your data. The seriousness of this problem depends on how many bad sectors exist. I.e.

, how many «File record segment is unreadable» error lines appear on your screen. It is possible to fix this problem by running and executing a command within Command Prompt as shown in this guide.

NOTE: If you are unable to start Windows normally and receive this error on operating system startup, you will need to boot into Safe Mode.

To find out how to start Windows in Safe Mode, read this guide and use the «Interrupt Windows Boot Process» method described at the link previously given.

Alternatively, use the Windows Installation CD/DVD/USB and boot Windows into Safe Mode using the Automatic Repair (Advanced Startup) screen.

Table of Contents:

Download Computer Repair Tool

It is recommended to run a free scan with Spyhunter — a tool to detect malware and fix computer errors. You will need to purchase the full version to remove infections and eliminate computer errors.

Run A Chkdsk Command 

There is a built-in tool in Windows tool available to check the integrity of disks. It examines disks and corrects many common errors. You can run this tool from the command line or through a graphical interface. In this guide, we show how to run it through Command Prompt.

If you are unable to start Windows normally, you can run it when in Safe Mode, or from the Advanced Startup screen.

If you have started Windows in Safe Mode, open Command Prompt as administrator by typing «command prompt» in Search and clicking the «Command Prompt», and then selecting the «Run as administrator» option.

You will be asked if you want to restart your computer to perform the scan. Type «Y» and press Enter. Wait for the chkdsk process to finish and see if this command resolved the «File record segment is unreadable» error.

[Back to Table of Contents]

Connect Your Hard Disk To Another Computer

If the hard disk is failing because of physical damage (scratches and similar defects), save your files by connecting the hard drive to a different/working computer.

If you are not sure how to connect a hard drive to another computer, seek out an experienced technician. When the hard drive is connected, it will appear as an additional drive in «My Computer» or «This PC».

You can then copy your files (if the drive is not too damaged) onto a working hard drive or external drive. Apply this method whether your disk is damaged physically or logically.

[Back to Table of Contents]

Clone Your Hard Drive

Another way to save your files and data is to clone your current drive to a new one. If the files are still intact, you should be able to clone them. This, however, does not mean that you will be able to save 100% of your files.

You will also need to get a new drive and drive cloning software. After cloning the hard drive (if you need to save your files), you can try to try to format your old hard drive.

This will erase all data stored, but might allow you to use it in future if the damage was logical and not physical.

We hope that your hard drive was not too seriously damaged and you were able to fix the «File record segment is unreadable» error by running a chkdsk command. Many users reported that running this command resolved the problem.

If you know of another method that solved this problem without the need to format the hard drive and it is not mentioned in our guide, please do not hesitate to share it with us and others by leaving a comment in the section below.

 

[Back to Table of Contents]

Video Showing How To Fix «File record segment is unreadable» Error:

[Back to Top]

Источник: https://blog.pcrisk.com/windows/12965-file-record-segment-is-unreadable